I also sell: NCF18 / 800V bearing 23120BD1 bearing EGB5560-E40 bearing 23048K.MBH3048 bearing HH926749 / HH926710 bearings BK2212 bearing HR30210C bearing 629 bearing SY12TF bearings 6309-ZN bearing NJ2240 + HJ2240 bearing TAF172520 Bearing 249 / 710CA / W33 bearing 7220B / DT Bearing N232EC bearing
   Wheel bearings Shenzhen 7300C / DT NSK Bearings agents
[7300C / DT bearing】 Size Specifications:
Bearing Model: 7300C / DT bearing
Inner diameter: 10mm
Outer diameter: 35mm
Thickness: 22mm
Bearing series: angular contact ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported bearings NSK
   High-speed precision angular contact ball bearings, mainly for high-speed rotating light load situations requiring high precision bearings, high speed, low vibration, low temperature rise and a certain life. Often high-speed spindle bearing installed in pairs, is the inner surface of the high-speed spindle grinder key component parts. Main Specifications:
   1. Bearing precision index: more than GB / 307.1-94 P4 level precision
   2. High-speed performance: dmN value of 1.3 ~ 1.8x 106 / min
   3. life (average):> 1500 h
   High-speed precision angular contact ball bearing life of a great relationship with the installation, you should note the following
   1. Bearing installation should be in clean, clean a room, to go through carefully matching bearing, bearing spacer to go through the grind, while maintaining the inner and outer ring spacers high premise spacer parallelism should be controlled in 1um the following;
   2. The bearings should be cleaned before installation clean, cleaning the inner slope upward, feel should be flexible, no sense of stagnation, dried, placed in a predetermined amount of fat, in the case of oil mist lubrication should be placed in a small amount of oil mist;
   3. Bearing installation should use special tools, even by force, non-beat;
   4. Bearing storage should be clean and ventilated, non-corrosive gases, relative humidity less than 65%, long-term storage should be regularly rust.
   NSK Bearings internal structure
    A-- different interior design and standard bearings.
    A-- angular contact ball bearings, the contact angle of 30 degrees.
    A5-- angular contact ball bearings, the contact angle of 25 degrees.
    B-- angular contact ball bearings, the contact angle of 40 degrees.
    C-- angular contact ball bearings, the contact angle of 15 degrees.
    C-- tapered roller bearings, the contact angle of 20 degrees.
    D-- tapered roller bearings, the contact angle of 28 degrees.
    C, CA (with a solid brass cage), CD (with stamping cage) - high load-aligning roller bearings.
    E-- high load Cylindrical roller bearings.
    H-- high load thrust-aligning roller bearings.
    J-- tapered roller bearing outer ring raceway small end diameter, angle, outer ring width is consistent with ISO regulations.
   We recommend the following models: FNL506A bearing LRTZ121614 bearing QJ332N2 bearing 23128RHK + H3128 bearing KRV35-PP bearing BL209Z bearing 61908N Bearing 61800-RS1 bearing NCF29 / 750V bearings EGB5540-E50 bearing 7300C / DT bearing
   I also recommend you 7300C / DT bearing uses: extrusion equipment, fittings heating machine, plastic wire drawing machine, candy machine, hydrostatic guideways, edible oil processing equipment, machine tools and extension rods, other oil equipment, woodworking tools, ball mill, etc. use.