I also sell: MF137ZZ bearing 6214-2RS bearing EGF18170-E40 CR10-1VB bearing 6311-2Z bearing 54315 bearing bearing 61817-Z bearings 7008ACD / P4A bearing N420M bearing NA6907U bearing 7013 bearing 353108A bearings 4T-32008X bearing B7210E.T bearing 24134 -2CS5 / VT143 bearing
   Shenzhen NSK ball bearings 7240C / DT size parameters
[7240C / DT bearing】 Size Specifications:
Bearing Model: 7240C / DT bearing
Inner diameter: 200mm
Outer diameter: 360mm
Thickness: 116mm
Bearing series: angular contact ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported bearings KOYO
   characteristic
    1, universally matchable bearings are universally matchable bearings through special processing, when the bearing is installed close to each other, any combination can achieve the established internal clearance or preload, and the average load distribution, without having to use pads sheet or the like.
    Paired bearings in: When there is insufficient load-carrying capacity of a single bearing (using blow-linked configuration) or when to bear combined load or the axial load in both directions (with back to back or face to face configuration).
    2, the basic design bearings (can not be used universally matchable) for single bearing configuration
    Single row angular contact ball bearings are mainly applied the basic design configuration, only one bearing at each location. Its width and the projecting amount of general tolerances. Therefore not suitable for the two single row angular contact ball bearings against the installation.
   NSK bearing clearance
    C1-- million to help the Electrical and Mechanical NSK Bearings Radial Bearing radial clearance, clearance smaller than C2 swim.
    C2-- radial bearings radial clearance, smaller than the standard clearance.
    CN (omitted) - Standard Radial Bearing radial clearance.
    C3-- Radial Bearing radial clearance, clearance larger than the standard.
    C4-- Radial Bearing radial clearance, clearance larger than C3.
    C5-- Radial Bearing radial clearance, clearance larger than C4.
    CC1-- cylindrical roller bearings (not interchangeable) radial clearance, smaller than the CC2 clearance.
    CC2-- cylindrical roller bearings (not interchangeable) radial clearance, smaller than the standard clearance.
    CC-- cylindrical roller bearings (not interchangeable) standard radial clearance.
    CC3-- cylindrical roller bearings (not interchangeable) radial clearance, clearance larger than the standard.
    CC4-- cylindrical roller bearings (not interchangeable) radial clearance, clearance larger than CC3.
    CC5-- cylindrical roller bearings (not interchangeable) radial clearance, clearance larger than CC4.
    MC1-- small, miniature ball bearing radial clearance, clearance smaller than MC2.
    MC2-- small, miniature ball bearing radial clearance, clearance smaller than the MC3.
    MC3-- small, miniature ball bearing radial clearance standard clearance.
    MC4-- small, miniature ball bearing radial clearance, clearance larger than the MC3.
    MC5-- small, miniature ball bearing radial clearance, clearance larger than the MC4.
    MC6-- small, miniature ball bearing radial clearance, clearance larger than the MC5.
    CM-- motor with deep groove ball bearings, cylindrical roller bearings radial clearance.
    CT-- motors with cylindrical roller bearing radial clearance.
   We recommend the following models: NK70 / 25 bearing NN3034-AS-KM-SP bearing TRA0607R bearing 23160BKD1 + H3160 bearing NKIS30 bearing 21320 bearing 7240C / DB bearing NX20 bearings 59196F bearing 4230/500 bearing 7240C / DT bearing
   I also recommend you 7240C / DT bearings use: whirlpool pumps, fatigue testing machine, metal welder, horizontal pumps, rubber cutting machine, energy storage, electric pumps, rubber joint machine, pressure welding, magnetic pump, and other purposes.