And pay attention to the role of bearing with point
With the role of three Thai SUNTHAI bearing is such that the stationary ring and the rotating ring of the bearing mounting portion, respectively, of the stationary part (usually the bearing) and a rotating part (usually the shaft) consolidation together to achieve load transfer in the rotating state and limited motion system with respect to the basic tasks of a stationary system location. The shaft and bearing, the bearing requires a fixed position in three directions radial, axial and tangential direction. Radial and tangential positioning by three Thai SUNTHAI bearing rings achieve tight fit mining, axial positioning only in a few cases were a tight fit; axial spacing commonly used parts, such as end caps and the like ring axis to the position defined in the clearance range. Should be chosen with the focus on the following four points: (1) the circumferential surface of the bearing rings should be well supported and even by force, in order to reduce distortion, and give full play to the bearing capacity. (2) in their mating rings can not slide in the tangential direction of the surface, otherwise it will damage the mating surfaces. (3) The free end of the bearing must be able to change with the length of the shaft and the bearing hole adapt, that must have the ability to adapt to the axial position of swimming within a certain range. (4) must be taken so that the three Thai SUNTHAI bearing installation and removal easy, saving time saving time and labor costs.
