Rolling bearing arrangement includes not only, but also with bearing-related components, such as shafts and housings. A very important part of the lubricant is also bearing arrangement, since the lubricant to the anti-wear anti-corrosion, so the bearing to fully play its role. In addition, also a very important component, the seal performance of the seal member cleaning is essential for the lubricant. Cleanliness has a profound effect on bearing life, which is why lubricants and seals have become part of the SKF business reason.
In order to design rolling bearing arrangement, needs
- Select the appropriate bearing type and
- Determine the appropriate bearing size,
But this is not enough. Also consider other aspects:
- For example, the bearing arrangement suitable form and design of other components,
- The right fit and bearing internal clearance or preload
- Fixing means,
- Appropriate seals,
- Lubricant type and dose, and
- Installation and removal methods.
Each individual's decision will affect the bearing arrangement of performance, reliability and economy.
The effort required depends on whether the optional experience with similar bearing. Encounter lack of experience, there are special requirements, or the need for cost bearing arrangement and any other subsequent appearance given special consideration when you need to do more work, such as more accurate calculations and / or testing.
In chapter after comprehensive technical introduction, the bearing arrangement design staff will see the basic information required in accordance with the general requirements of the order provided. Obviously, it is impossible that all information every conceivable bearing application needs are covered. For this reason, we will mention a comprehensive SKF application engineering service in many places, including the service and how to make the right choice bearing a complete bearing arrangement computing and other technical support. For the bearing arrangement of the technical requirements, the higher, the more limited use of the bearing in a particular application experience, the more we should take advantage of this service.
Comprehensive technical chapters include information generally applicable to ordinary bearings, or at least apply to a set of bearings. If you only need some precise information about specific bearing can be found in the relevant text corresponding classification table in the previous chapter.
It should be noted, appear in the product tables for load and speed, and fatigue load limit are approximations after rounding.
