I also sell: 23988EW33K bearing 24144RHAK30W33 bearing BA146Z bearing BT4B332596 / HA4 bearings 81214TN bearing 7326CDB bearing HJ313E bearing NU2212ECP bearing 32324A bearing 71910C / DF bearing 22244BK + AH2244 bearing 6215N bearing 463/560 Bearings NKXR40 bearing 7201B / DB bearings
   Deep groove ball bearings Shanghai NSK 7219C / DT bearing distributors
[7219C / DT bearing】 Size Specifications:
Bearing Model: 7219C / DT bearing
Inner diameter: 95mm
Outer diameter: 170mm
Thickness: 64mm
Bearing series: angular contact ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported bearings KOYO
   Structural deformation double row angular contact ball bearings, there are four:
   A Type: 90mm outside diameter less than or equal to the standard design of the bearing. No ball gap, it can withstand the equivalent of two-way axial load. Using lightweight glass fiber reinforced nylon 66 cage, the bearing temperature rise is very small.
   Type A: 90mm diameter greater than the standard design of the bearing. Side of the ball gap, with z steel stamping cage or brass cage entity.
   E-type: is reinforced structure, the side with filling slots, you can install more of the ball, so the higher carrying capacity.
   Both sides with a dust cover and sides with a ring type, A-type design and E-type design of double row angular contact ball bearings can be on both sides with a dust cover (non-contact) or seals (contact). Sealed bearings are filled with anti-rust lithium grease, generally between -30 degrees to 110 degrees operating temperature. Without re-lubrication during use, no heating before installation.
   When the double row angular contact ball bearing installation should be noted that although two-way bearings can withstand axial load, but if one side of the ball gap, it should be careful not to let the main axial load through the notched side gutter.
   nsk bearing inspection and acceptance inspection NSK Bearings, users must have the following knowledge:
     (1) Inspection NSK Bearings commodity according Which standards;
     (2) NSK Bearings commodity inspection which projects, why should we examine these projects;
     Before (3) NSK Bearings Goods conducting quality inspection, what preparatory work needs to be done, why should these preparations;
     (4) various test items NSK Bearings goods under what conditions, with what means, what equipment to carry out tests, test results must be qualified in a kind of tolerance;
     (5) NSK Bearings large quantities of goods and sometimes, not one hundred percent inspection, then what kind of sampling plan should be used to extract much quantity for examination, can be more comprehensive and adequate reliability represent the quality of all merchandise bearing, and test results be measured and what criteria to determine whether these goods are eligible grant should be accepted or should be rejected substandard batches.
   We recommend the following models: LM48548 / 10 bearing 61902-2RZ bearing KMTA19 bearing 400KBE131 bearing NJ2324E B7216E bearings 5309E bearing bearing NU1028 bearings 23022-E1-TVPB bearing 30340 bearing 7219C / DT bearing
   I also recommend you 7219C / DT bearing Uses: Machine tool carrier, chemical equipment, presses, chain hoist, milling machine, winch, air hammer, mining elemental analyzer, cold heading machine, test sieve, etc. use.