I also sell: 21308EK + H308 bearings NU1014-M1 bearing MF41X bearing 6204-2ZN bearing NJ2224R + HJ2224R bearing 4307ATN9 RNA4910-RSR bearing 67983 bearing bearing 7332AC bearing NF38 / 630MB bearings NU1052-M1 bearings 7017AC / DB bearing 2311K.2RS.TV bearing H2326 bearing 7821CDF bearing
   Cross bearing NSK Bearings Shenzhen 71901CDF sample diagram
[71901CDF bearing】 Size Specifications:
Bearing Type: 71901CDF bearing
Inner diameter: 12 mm
Outer diameter: 24 mm
Thickness: 12 mm
Bearing series: angular contact ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported bearings NACHI
   characteristic
    1, universally matchable bearings are universally matchable bearings through special processing, when the bearing is installed close to each other, any combination can achieve the established internal clearance or preload, and the average load distribution, without having to use pads sheet or the like.
    Paired bearings in: When there is insufficient load-carrying capacity of a single bearing (using blow-linked configuration) or when to bear combined load or the axial load in both directions (with back to back or face to face configuration).
    2, the basic design bearings (can not be used universally matchable) for single bearing configuration
    Single row angular contact ball bearings are mainly applied the basic design configuration, only one bearing at each location. Its width and the projecting amount of general tolerances. Therefore not suitable for the two single row angular contact ball bearings against the installation.
   NSK bearing ring shape
    K-- tapered bore, taper 1:12
    K30-- tapered bore, taper 1:30.
    E-- rings on a cut or hole.
    Tanker, E4-- hole on the outer ring.
    N-- outer diameter with a stopper groove.
    NR-- outer diameter with snap groove, snap ring.
   NSK Bearings fit and liner
    DB-- million to help the Electrical and Mechanical NSK Bearings installed in pairs back to back.
    DF-- face to face in pairs.
    DT-- series installed in pairs.
    + K-- outer ring with liner.
    + L-- inner padded.
    + KL-- inner and outer rings with a liner.
   We recommend the following models: 562 060 bearing bearing 7305B bearing 316353DB 7914CDT NJ209E.TVP2 + HJ209E bearing bearing 7311B / DT bearing QJ1988N2MA bearing 7022AC bearing 7930CDB bearing 32009X / 32009X bearing 71901CDF bearing
   I also recommend you 71901CDF bearing uses: dumpers, punch, offset, combined machine tools, drying equipment, offset printing presses, slotting, the restaurant in equipment, flattening machine, casting machine tools, and other purposes.