I also sell: 222S.600 bearing 595A / 592XE bearing NNU6932V Bearing 6310-RZ bearings F-803024.PRL bearing 22213RHR bearing 3585R / 3525 22312EW33 bearing SL182208 bearing bearing bearing 7308CDB 2206KTV + H306 bearing STO15 bearing 6215 bearing bearing NU421 bearing ZAXFM0835
   Cylindrical Roller Bearings Shenzhen NSK 7226B / DT bearing distributors
[7226B / DT bearing】 Size Specifications:
Bearing Model: 7226B / DT bearing
Inner diameter: 130mm
Outer diameter: 230mm
Thickness: 80mm
Bearing series: angular contact ball bearings
Bearing Brand: NSK Bearings
Spot supply of imported bearings NSK
   Structural deformation double row angular contact ball bearings, there are four:
   A Type: 90mm outside diameter less than or equal to the standard design of the bearing. No ball gap, it can withstand the equivalent of two-way axial load. Using lightweight glass fiber reinforced nylon 66 cage, the bearing temperature rise is very small.
   Type A: 90mm diameter greater than the standard design of the bearing. Side of the ball gap, with z steel stamping cage or brass cage entity.
   E-type: is reinforced structure, the side with filling slots, you can install more of the ball, so the higher carrying capacity.
   Both sides with a dust cover and sides with a ring type, A-type design and E-type design of double row angular contact ball bearings can be on both sides with a dust cover (non-contact) or seals (contact). Sealed bearings are filled with anti-rust lithium grease, generally between -30 degrees to 110 degrees operating temperature. Without re-lubrication during use, no heating before installation.
   When the double row angular contact ball bearing installation should be noted that although two-way bearings can withstand axial load, but if one side of the ball gap, it should be careful not to let the main axial load through the notched side gutter.
   NSK Bearing tolerance class
    P0 (omitted) - tolerance levels comply with JIS standards for 0.
    P6-- tolerance levels comply with JIS standards for six.
    P6X-- tolerance levels comply with JIS standards for class 6X.
    P5-- tolerance class in accordance with 5 JIS standards.
    P4-- tolerance class in accordance with 4 JIS standards.
    P2-- tolerance levels comply with JIS standards for two.
   NSK Bearings special specifications
    X26-- use temperature limit of 150 degrees Celsius.
    X28-- temperature limit of 200 degrees Celsius
    X29-- use temperature is limited to 250 degrees Celsius.
    S11-- aligning roller bearings, temperature limit of 200 degrees Celsius
   We recommend the following models: GEC670FBAS bearings 5203A-2RS1TN9 bearing 682ZZ bearing 23260CAE4 bearing NUP418 bearing GIKR20-PB bearing 7205ADT bearings 6028-Z bearing NJ2332EC + HJ2332EC Bearings 7228DB bearing 7226B / DT bearing
   I also recommend 7226B / DT bearings use: chain hoist, milling machine, winch, air hammer, mining elemental analyzer, cold heading machine, test sieve, die-casting machines, sifter, flame arresters, etc. use.