With the rapid development of China's construction, cement, metallurgy and other industries, the use of the crusher equipment has gradually expanded. But because customers often ignore bearing maintenance, leading to malfunction and can not run properly. Star Division following network hardware to provide you with some of the extended crusher bearing life skills, for easy reference.

1. Before installing the crusher equipment First count the number of parts, checking damage various parts machined surface and the thread caused Handling and clear.
2, when the crusher installation to be painted on the surface of the fixed contact with dry oil, in the active surface coated with thin oil. In particular, after bearing installation, be sure to tilt the outer ring coated bearings with lubricant.
3, the bearing lubricant coating is also very particular, cover all the roller surface coated with grease lubrication, after James finished restoring the position of the outer ring, the need to use a plastic film covering and dust.
4, daily use should pay attention to cleaning bearings, bearing into the oil first, then with a brush to brush off the dirt bearing surface, and then make the appropriate heating oil, and then the ball inside the bearing and vulnerabilities detailed cleaning .
5, after working for some time crusher, to conduct regular inspections. Removing swap hardware, if the bearing wear is relatively small, can achieve the correct geometry for turning on a lathe. Also note that the gap between the eccentric shaft and the bearing and bearing between the spindle and, if more than 1.5 times, should be replaced or padded adjustment.