An eccentric IKO bearings maintenance: as long as possible in order to maintain good condition IKO bearings original performance required maintenance, overhaul, in order to prevent accidents in the first place, to ensure the reliability of operation, improve productivity, economy.
The best operating conditions and maintenance of appropriate machinery operating standards, regular basis. Including monitoring the operating condition, supplement or replace the lubricant regularly demolished checks.
As a matter maintenance operation, a rotating eccentric IKO bearing sound, vibration, temperature, and so the state of the lubricant.
2, IKO bearings eccentric overhaul: IKO bearings cleaning: When removing the eccentric IKO bearings overhaul, the first recorded appearance of the eccentric IKO bearings, confirm the remaining amount of lubricant, lubricant after sampling inspection, wash eccentric IKO bearings. As a cleaning agent, the use of ordinary gasoline, kerosene.
IKO bearings removed eccentric cleaning, cleaning of coarse and fine cleaning, were placed in the container, put the first metal mesh bottom, so that no direct contact IKO bearings dirt container. Coarse cleaning, if the IKO bearings rotate with dirt, rolling surface damage IKO bearings should be noted. In the crude oil washing, use a brush to remove grease, adhesive material, generally clean, into sperm washing.
Sperm washing is eccentric IKO bearings while rotating in cleaning oil, while carefully cleaning. In addition, cleaning the oil must be kept clean.
  3, IKO bearings eccentric overhaul and judgment: In order to determine whether the removed IKO bearings can be used to wash the IKO bearings after a clean check. Check the raceway, rolling surface, with the surface state of cage wear, increasing the IKO bearing clearance and dimensional accuracy has nothing to fall damage, abnormal. IKO small non-separable ball bearings, inner ring with one hand to the level of support, rotating outer ring to confirm whether smoothly.
Tapered roller bearings and other separation-shaped IKO bearings, rolling elements can be, respectively, the outer ring raceway surface inspection.
Large IKO bearings because they can not rotate by hand, pay attention to check the rolling body raceway, cage, and other exterior wall surface, the more important the higher IKO bearings must be carefully checked.
   4, IKO bearings eccentric choice: use the scroll IKO bearings of various mechanical devices, instruments, and other market increasingly stringent performance requirements for IKO bearings required conditions, performance is also becoming more diverse. Order from a large number of structures, sizes, choose the most suitable IKO bearings, need to be studied from various angles. When selecting IKO bearings, in general, considered as IKO bearings arranged shafting, ease of installation, removal of, IKO bearings allowed space, size and market IKO bearings, etc., generally decided IKO bearing structure. Secondly, while the comparative study of various IKO bearings using a variety of mechanical design life and IKO bearings of different endurance limit, while the decision IKO bearing size. When selecting IKO bearings, often only considered somewhat IKO bearing fatigue life, about the grease from the grease life occurred aging, wear, noise, etc. also need to be fully studied. Moreover, according to different uses, it is necessary to select for the accuracy, clearance, cage structure, grease, etc. required for specially designed IKO bearings. However, choosing IKO bearings and no certain order, rule, priority should be considered is the condition required for IKO bearings, performance, most related matters, particularly practical.
5, the use of eccentric IKO bearings: Rolling IKO bearings are precision components, its use should also be carefully carried out. No matter how high-performance IKO bearings, if used improperly, it will not get the expected performance. Cautions about IKO bearings below.
(1) maintain eccentric IKO bearings and surrounding clean.
Even the eyes can not see the little dust, will bring bad influence to the IKO bearings. Therefore, to keep the surrounding clean so that dust will not invade IKO bearings.

(2), careful use of eccentric IKO bearings.
IKO bearings in use to give a strong impact, will have scars and indentations, become cause of the accident. Severe cases, crack, fracture, it must be noted.
(3) using the appropriate eccentric bearing IKO operating tool.
Avoid existing tools instead, you must use the right tools.
(4), pay attention to the eccentric IKO bearings rust.
When operating IKO bearings, hands sweat will become rusty reasons. To note with clean hands operation, the best possible wear gloves.
5IKO bearing lubrication: Lubrication aim is to reduce the rolling bearings IKO IKO bearings internal friction and wear, prevent burning stick, its lubricating effect as follows.
(1) reduce the eccentric IKO bearings friction and wear.
In each contact portion of the ferrule, and the rolling elements constituting IKO bearing holder to prevent metal contact to reduce friction and wear.
(2), to extend the fatigue life.
IKO bearings rolling fatigue life, in rotation, the rolling contact surfaces oiled, then extended. Conversely, low viscosity oil, lubricating oil film thickness is not good, then shortened.
(3), friction heat is discharged and cooled.
Circulating oil to the oil law and other hot exhaust generated by friction or heat coming from the external cooling. IKO bearings prevent overheating, prevent oil itself aging.
(4) Other
There IKO bearings inside to prevent foreign invasion, or to prevent rust, corrosion effect.
Lubrication methods:
IKO bearing lubrication methods, divided into grease and oil lubrication. In order to make a good play function IKO bearings, first, to select the appropriate conditions, the use of lubrication purposes. If only consider lubrication, oil lubrication dominant. However, there can be simplified greased specialty structures around IKO bearings, the grease and oil lubrication compare the pros and cons.
6, eccentric installation of IKO bearings: eccentric IKO bearings installed correctly, affecting accuracy, longevity, performance. Therefore, the design and assembly departments to fully study the IKO bearings installed. I hope to be in accordance with the operating standards for installation. Operating standards of the project is usually as follows:
(1), cleaning bearings IKO IKO bearings and related components
(2), size and finishing the inspection related components
(3), the installation
(4), good IKO bearings installed after inspection
(5), the lubricant supply
I hope to be installed in the front, just open the package IKO bearings. General grease lubrication, not clean, direct filling grease. Lubricating oil, general do not wash, however, the instrument used by IKO bearings or high-speed, use of oil washed clean, remove painted on IKO bearings rust inhibitor. Remove the rust inhibitor IKO bearings, rust, so you can not be placed aside. Furthermore, IKO bearings have been sealed grease, not wash directly.
Installation IKO bearings, IKO bearing structure due to meet, conditions vary, in general, due to the multi-axis rotation, so the inner need interference fit. IKO bearings cylindrical bore, multi-purpose press push, or fitted with a thermal method. Cone occasions, mounted directly on the shaft taper, or sleeve installation.
When mounted to the housing, with the more general clearance, interference of the outer ring, usually pressed into the press or shrink fitting method is also cooling installation. With dry ice as coolant, shrink fit mounting occasion moisture in the air will condense on the surface of the bearing IKO. Therefore, the need for appropriate corrosion protection.